Specialty Lubes

Overview

MERCURY BAR & CHAIN OILS are premium lubricants formulated with a robust, anti-wear additive package that has been designed exclusively for use on commercial quality chainsaws. These oils are made using the highest quality base stocks and contain a specialized wear modifier and tackifier agent that also prevent rust and corrosion and deliver outstanding performance in today's modern cutting equipment.

Applications

MERCURY BAR & CHAIN OILS are exceptionally adhesive lubricants recommended for high speed chain saws where extreme pressure and temperatures exist. They have been developed to lubricate the chain, bar guide, and drive sprocket on commercial chain saws performing at high levels, and can also be used on industrial chain drives, slides and ways.

Features & Benefits

MERCURY BAR & CHAIN OILS lubricate the chains and bars on all modern and vintage chainsaws. Their superior ability to cling tenaciously to surfaces reduces resin build up and heat generation for less oil sling off and cooler operation. Less oil loss and better lubrication equals increased productivity, greater tool protection and lifespan. MERCURY BAR & CHAIN OILS prevent premature wear, are available in multiple viscosities for differing ambient weather, and keep chains, bars, and sprockets performing at their best.

Typical Properties

CHARACTERISTICS Chain Oil
SAE Viscosity Grade10W20W30W40W50W
Viscosity, cSt @ 100 °C5.67.812.014.819.0
Viscosity Index140140140140140
Flash Point, °C230230230240260
Pour Point, °C-27-24-20-21-21


Overview

MERCURY SPARK EROSION FLUID are high quality metalworking fluids designed for use in Electrical Discharge Machines. Available in two viscosities, they are particularly suitable for the fine finishing of small holes and cavities and ensure the efficient flushing of eroded particles away from the spark zone.

Applications

MERCURY SEF-LV is used primarily as a dielectric fluid for spark erosion but can be used for pressing, spinning and reaming alloys and some free cutting bronzes.MERCURY SEF-HV is also used as a dielectric fluid for spark erosion and has a higher flash point. It is used successfully to hone cast iron and in the high speed precision machining of non-ferrous metals.

Feature And Benefits

High performance mineral oil based EDM fluids, Suitable for fine and rough spark erosion techniques. Low viscosity and low odour fluids. Excellent flushing characteristics removes particles from spark zone.

Typical Properties

CHARACTERISTICS EDM Lubes
Product CodeSEF-LVSEF -HV
AppearanceCrystal ClearCrystal Clear
Colour, Saybolt+25+25
Viscosity, cSt @ 40 °C2.23.5
Density @ 29.5 °C0.7600.78
Flash Point110130
IBP/FBP240/280280/320


Overview

MERCURY PUNCHOL fluids are high performance evaporative lubricants, a low viscosity, low odor and solvent based neat stamping & punching oil for Air Conditioners ,Heat exchangers, Copper tube bending and Radiator Fine punching. Operation of sheet metals, such as aluminum alloy, stainless steel, zinc-coated steel, etc.

Applications And Features

MERCURY PUNCHOL are developed to optimize tool life, part quality, and cost efficiency. Suitable for moderate to relatively severe metalworking operations, such as stamping, punching, tapping, shallow drawing, light press work, roll forming etc.

Typical Properties

PRODUCT CODE Punch Oil
5000 6000 800
Appearance Appearance
Colour Colourless Colourless Colourless
Viscosity @ 40°C 1.46 1.55 2.0
Flash Point , ° C 50 60 80
Pour Point , ° C<- 35<-35<-45
Moisture Content NilNilNil
Aniline Point , ° C808081
Cu Strip CorrosionNo Corrosion 1a
Acid Value0.010.010.01


Overview

MERCURY HEAT TRANSFER OILS serve as excellent heat transfer media for manufacturing processes where temperatures will not exceed 320°C. In properly designed closed systems equipped with expansion tanks, they will provide excellent service and are non-corrosive. These premium oils are highly refined paraffinic oils with excellent oxidation stability and low temperature properties.

Applications

MERCURY HEAT TRANSFER OILS are designed for use in closed system boilers and other transfer systems equipped with expansion tanks where temperatures do not exceed 600°F.

Features & Benefits

MERCURY HEAT TRANSFER OILS employ highly refined base stocks for efficient heat conduction and excellent thermal and oxidation stability. They are non-corrosive and help minimize coking and varnish build up.

Typical Properties

CHARACTERISTICS Thermic Fluid
ProductHTO 22HTO 32
Viscosity, cSt @ 100°C3.85.6
Viscosity, cSt @ 40°C2232
Viscosity, SUS @ 37.8 °C100150
Viscosity Index109113
Flash Point, °C190215
Pour Point, °C-18-15
Color0.50.5
Conradson Carbon, %NilNil


Overview

MERCURY MULTI-PURPOSE ATF is a premium automatic transmission fluid designed for new generation, electronically controlled transmissions.

Applications

MERCURY MULTI-PURPOSE ATF is designed for make-up and refill in 2005 and earlier Light Motors vehicle and  light trucks. MERCURY MULTI-PURPOSE ATF can also be used for off-highway transmissions, power steering, and other hydraulic systems requiring an Allison C-4 fluid. Meets requirements of Allison TES-389. The product also meets the industrial hydraulic oil demands of Denison HF-O, Vickers vane and Sundstrand piston pumps.

Features & Benefits

MERCURY MULTI-PURPOSE ATF utilizes high quality, highly refined base stocks for long service life and a superior additive system for protection of key transmission components. It contains specially formulated antioxidants and anti-wear agents, detergents and de-foaming agents, as well as special friction modifiers and lubricity agents for smooth shifting over a wide range of driving conditions, temperatures, and transmissions designs


Typical Properties

CHARACTERISTICS Transmission Oil
Product Code5053
Viscosity, cSt @ 40 °C34.49
Viscosity, cSt @ 100 °C7.62
Viscosity, cP @ -40°C15,400
Viscosity Index175
Flash Point, @ °F224
Pour Point, @ °C-41
ColorRed


Overview

MOALSIL -Silicone fluids are characterized by a very high thermal and thermo oxidative resistance and have excellent resistance to temperatures from -60 to +300°C. MOALSIL fluids are transparent, tasteless and odorless liquids with no known harmful effects. Their viscosities lie between 0.65 and 1,000,000 mm2/s depending on the type.

MOALSIL Silicone fluids additionally possess
• Extremely low volatility• Excellent shear stability• Low surface tension, and• Optimum water repellency.

Application

MOALSIL silicone fluids are ideal for use as hydraulic or transformer oils, damping liquids, diffusion pump fluids, thermally resistant lubricants, dielectrics, defoamers and release agents for high-performance digital printing machines. They can also be used for hydrophobic treatment of glass and mineral wool. Other important applications are to be found in cosmetics, pharmaceuticals and the textile industry.

Typical Properties

CHARACTERISTICS Silicon Oil
Viscosity Grade2050100350500
Viscosity, cSt @ 25 °C2050100350500
Specific Gravity0.950.9590.9650.970.97
Flash Point °C240280>300>300>300
Pour Point °C-55-55-55-50-50
Surface Tension20.620.720.720.921
Refractive Index1.4001.4021.4031.4031.403